Hydrazone Operation Guide
Formulated for performance, perfected for luxury - Hydrazone is the singular, intelligent solution for complete hot tub care.
Hydrazone, when combined with an ultra violet or ozone system, is designed and engineered to be a stand alone chemical to take care of your entire spa chemical needs. Once you use Hydrazone in your spa you will never want to go back to harmful chemicals, such as chlorine. Hydrazone is an industrial strength (34%) Hydrogen Peroxide (H2O2) based product. It works by sterilizing the water thus preventing anything from growing.
Hydrazone will extend the life of your spa equipment including, but not limited to, heaters, jets, seals, gaskets and hard covers. Hydrazone comes with a complete 30-day money back guarantee.
Getting Started With Hydrazone Cleaning System
Drain Your Spa: Completely drain all of the water out of your spa. After all of the water has been removed, flush the jets with your garden hose at half speed for two to three minutes per jet. After you have completed flushing out the jets, remove all the water and sanitize the spa by wiping with a clean cloth with water and a bleach solution. The bleach solution consists of ten parts water and one part bleach.
Install a Clean Dry Filter: We recommend starting with a new filter, however you can clean your old filter with Hydraclean filter cleaner and high pressure hose nozzle. The spa filter catches the dirt and oils that make your spa water cloudy or smell. Since Hydrazone is always cleaning and disinfecting your spa water, your filters will need to be cleaned regularly.
The Hydraclean Filter Cleaner is mandatory to use with the Hydrazone product. This filter cleaner is the only cleaner that is guaranteed not to contaminate your water. Soak your filters in Hydraclean Filter Cleaner every other time you clean them, the other times you can clean your filters with high pressure water and the filter nozzle.
Take your time when cleaning your filters. The most common reason for cloudy water is a dirty filter, so it is very important to have clean filters in your spa. After the filters are thoroughly cleaned with Hydraclean Filter Cleaner they are ready to install. Fill your spa with water. After you have completely cleaned and disinfected your spa and installed a clean filter, fill your spa with water to its proper operating level.
Clean Filters are imperative with this product. If your filter is dirty you will use more Hydrazone than necessary. Clean your filters every three weeks to start, you may go longer, but do not exceed eight weeks between filter cleanings.
Adding Hydrazone to Your Spa: Hydrazone is added to your spa twice a week. In order to determine the correct amount of Hydrazone your spa requires, you will need to know the approximate capacity of the spa and use a ratio of 1 ounce of Hydrazone to 100 gallons of water and round up to the next full ounce.
For example, a 350 gallon spa will use 4 ounces of Hydrazone per day, or 14 ounces twice a week. Formula: 350 gallons x 1 ounce = 3.5. Rounded up = 4 ounces. 4 ounces per day x 7 days = 28 ounces per week, divided by twice a week equals 14 ounces. In it recommended that you add Hydrazone every 3-4 days (i.e. Sundays and Wednesdays).
Adding the Initial Dosage of Hydrazone. When using fresh water you will need to build up a reserve of Hydrazone. To do this, simply add ½ more than your normal three-day supply. In the case above, you would add 21 ounces of Hydrazone to the fresh water, to build that reserve. (Formula: 14 ounces +1/2 of 14=7. 14 ounces + 7 ounces = 21 ounces). NEVER use any other chemicals in your hot tub except Hydrazone or the shocking solution. Always keep a constant water temperature if possible.
Soaking & Cleaning Filters
Clean Filters are essential. If your filter is dirty you will use more Hydrazone than necessary. Clean your filters every three weeks to start, you may go longer, but do not exceed eight weeks between filter cleanings.
At least every other month, and with every water change, your cartridge should first be pre-rinsed with the garden hose then soaked overnight or a minimum of four hours with your Hydraclean solution according to packaged directions.
1. You will need a 10 gallon plastic container tall enough to have 1” to 2” of cleaner above the top of the filter. Plastic garbage cans work well. Keep one available to use only for your filter cleanings.
2. Fill a plastic container with 5 gallons of hot water.
3. Add 8 ounces of Hydraclean
4. Insert your dirty filters
5. Add 8 ounces of Hydrazone
6. Soak overnight or a minimum of 4 hours
7. Rinse the filters using a hose nozzle with maximum water pressure.
8. Make 2 complete revolutions around the filter and turn the filter over and make two more complete revolutions ensuring that the deep part of the pleats on the filter is clean.
9. Allow the filter to dry before inserting into the spa.
Rotate Your Spa Filters
Use the filter rotation method– while cleaning your dirty filter; swap it with a clean dry spare. With this system you’ll never have to wait to use your spa, and your filters will last longer. Allowing filters to dry completely after cleaning will help destroy any resident microorganisms.
Enjoy Effortless Luxury with Our Filter Concierge Service
Prefer to leave the maintenance to us? Our professional team will visit your property monthly to replace your used hot tub filter with a freshly cleaned one. We'll Carefully remove and transport the dirty filter for expert cleaning and secure storage until your next service.
While on-site, we'll preform a brief wellness check on your tub and notify you of any concerns - ensuring your spa remains in peak condition year-round.
Additional services may be provided upon request and may incur a separate fee.